The outlets in the two main bathrooms seem to work for a while and then they seem not to work. No breakers are blown, I have made sure I reset all the breakers in the box. The lights work right next to these lights so there is power going to those rooms just not the outlets. They are none GFI plugs so I cannot reset at the plug. I have tested the powder room plug. I had a tester and accidentally hit the button on the tester and now cannot get that plug to work either. Please help.
By Chris
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Are you sure the lights are on the same circuit?
Checking your wiring map (hopefully when you home was wired, they mapped it out in the breaker box). There could be a gfi in a different room that is tripping. For some reason, we have 2 outlets in the garage that are on the same circuit as one wall of the kitchen. I have to go out the garage to reset it if it trips.
You may also have a faulty breaker. Once you determine for sure which breaker goes to that outlets, replace the breaker.
Otherwise, you have a common junction between those two bathrooms that is shorting out. Ideally, the two bathrooms should not be on the same circuit.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
