social

Repairing A Ken Doll?

A plastic Ken doll with a broken neck.How do I fix my vintage Ken doll's broken neck?

Advertisement

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 

Silver Post Medal for All Time! 255 Posts
April 21, 20210 found this helpful
Best Answer

If you want it to retain any sort of value (usually it needs to be in great condition and you still need the box) then take it to a doll doctor. Otherwise, use a glue. I am a fan of gorilla glue and super glue.

 

Gold Feedback Medal for All Time! 949 Feedbacks
April 21, 20210 found this helpful
Best Answer

You can clean it up and glue it back together but the neck will not move and may be okay for play but cannot be of value if you're thinking of selling.

Advertisement


It looks like someone has already tried to repair by gluing the pieces together? or this is remnants of the neck piece that is now gone missing. Clean all of the stuff from the head neck hole so it will be smooth when you put the head and body together.
The neck 'knob' is broken off so you will have to try to buy another one - this is the piece that goes inside the two pieces. This vintage Ken may have had a piece on the head that sort of twisted on to the body but I believe you will have to try and use a neck knob now.

There are lots of YouTube videos about this subject but not very many actually deal with your problem.

You can purchase these knobs but not sure of the size you need. Here is a site that sells parts so you might contact them to see what they have.
retro-dolls-us.myshopify.com/.../80-s-90-s-barbie-replacement-neck...

Advertisement

You should also check craft stores like Michael's or Jo Ann's to see if they carry these parts.

It looks like Etsy has an assortment:
www.etsy.com/.../doll_joint?ref=cq_tag_raised_image...

YouTube videos are not very good on this subject so you may have to ask for help. If eBay member you can ask on their community site:
community.ebay.com/.../2973947

You can also ask for help on this doll site:
www.tapatalk.com/.../

 

Bronze Feedback Medal for All Time! 196 Feedbacks
April 21, 20210 found this helpful
Best Answer

Are you asking to sell or for play?

If it is for selling, I would sell as is and let the new owner repair it to his/her specs.

If it is for play, you could use Gorilla glue, but not if it is going to be played with by a child that could put it in his/her mouth as that adds danger to the doll (first breaking off again and second the glue content.

Advertisement

Some people have much better luck with Locite Plastics Bonding System Glue. I have never tried it...luckily I have never had this kind of damage on my dolls so I never had to, but this is what the pros use.

If you can afford it, a doll hospital is the best bet for a good fix that will enable the doll to be safe and able to be enjoyed!

Post back what you decide!

 

Silver Answer Medal for All Time! 440 Answers
April 27, 20210 found this helpful
Best Answer

If you want to sell this doll, then it is probably best to sell it as it is. I saw how doll heads are sold separately from the body.

If you want to fix it for yourself, then you can glue the head to the neck with any strong glue, but then the head will not move.

Advertisement

To make the head move, you can fill the neck up to the shoulders with modeling paste and screw into the neck (in the paste in the neck) a screw with a head slightly larger than the hole in the head of the doll, or add a plastic spacer of the desired diameter to the screw. The main thing is to decide on the height of the screw head so that the head rests well on the neck.
Smooth the surface and leave to dry very good for a few days.
Then just stick the head of the screw into your head of the doll.

Or, using silicone (for example a general purpose silicone thats used to seal around shower bases), form a bead at the bottom of the head (add inside too), which at the end will be slightly larger in diameter than the hole in the neck of the body: jenjoysalldolleduppage.wordpress.../.../

Advertisement


Let it cure very good for several days. And then force the head back into the body.

 
 
 

Silver Answer Medal for All Time! 440 Answers
April 27, 20210 found this helpful

And also, I think you can cut an hourglass piece out of hard rubber (car tire) and stick one end into your head and the other end into your neck.

 

Bronze Tip Medal for All Time! 59 Tips
April 21, 20210 found this helpful

E6000 glue holds very well. These minis would be great to have for all kinds of projects around the house also:
smile.amazon.com/.../ref=sr_1_15?dchild=1&keywords=e6000...

 

Gold Post Medal for All Time! 677 Posts
April 21, 20210 found this helpful

I would use Gorilla Glue. However, be aware that the head will not turn anymore.

 

Bronze Post Medal for All Time! 140 Posts
April 21, 20210 found this helpful

If this is a collectors doll , there are restoration places to restore this doll. luelstudio.com/.../ - If not a collectors, you can use E6000 glue or any strong super glues, to attach pieces.

 

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 
In This Page
Categories
Home and Garden Repair ToysApril 21, 2021
Pages
More
🐰
Easter Ideas!
🌻
Gardening
👒
Mother's Day Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-03-22 06:20:40 in 3 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Repairing-A-Ken-Doll.html