I have a Kenmore model #106.57368700. The ice maker was leaking and causing big a chunk to form in the ice bin. We replaced the water inlet valve, but that did not work so we replaced the ice maker. Now the water will not shut off. Any idea what need to do I need to do to fix it?
Thanks.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Resetting your frig may help here are some steps you can take - www.hunker.com/
It sounds like you have a leaky hose that fills the bin up that also needs to be replaced. The seals in these ice makers go bad from time to time and a lot of time the complete unit and hoses need to be replaced.
We repalced the inlet valve and that did not work. So we should repalce the hose? It has a little spout that comes in from the back of the fridge and into the top/back of hte icemaker. When we turn the water on it cotinues to run and starts running out the back of the ice maker.
Since this is a Kenmore I would suggest you contact Sears Service Center (your zip code) and see if they have any suggestions.
It's possible it needs a good defrosting and all hoses cleaned.
Have you tried talking with anyone at the store where you purchased your parts? Sometimes they know of how to fix problems like this.
Try resetting it and make sure the door is closing snugly.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
