How do I repair it?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
It might be full of scale and the nozzle may be clogged. They sell a de-scaler. You may also have a blown fuse. You would have to disassemble it to get to the fuse.
Other people experience this problem also:
www.fixya.com/
One person wrote it could be a fuse issue. You will need to take take the bottom off, find white wire from the element, bridge the offending fuse located under the special insulation, with a piece of wire - if you can't replace it, re-assemble, and it should work - Per Harold.
There is more than one model of the Scunci Steamer so you'll have to look for the suggestion that fits your model.
It may need to decalcify:
You can also use a commercial product:
www.amazon.com/
Here are some instructions for 2 different models:
www.fixya.com/
This problem is universal so you might want to read some suggestions from other sites:
howtomendit.com/
answers.yahoo.com/
Here is a link to previous answers on the ThriftyFun site:
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
