social

Shank Button from Old Aluminum Can

The shank button in place.I want to share with you my idea for making Shank Buttons. This project will help not only to make original buttons, but also to reuse old aluminum cans.

Advertisement

Total Time: 30 Minutes

Supplies:

Steps:

  1. Draw the template on the cardboard as shown in the photograph. Make sure all sides are equal. Cut out the template. Fold the cardboard template along the lines and check if the size of the future button is right for you.
  2. A pattern cut out of paper.
     
  3. Cut a piece of aluminum tin from the side of the can.

    Lay the sheet of tin on a flat, hard surface with the painted face up. Place a cardboard template on top, trace with a pencil and cut out.
  4. Tracing the pattern onto a piece of recycled aluminum.
     
  5. Bend the tin template along the lines. To keep the folds even, press the ruler against the line and then fold. Secure the folds with pieces of duct tape.
  6. Folding up the sides of the button.
     
    The top of the shank button.
     
    Advertisement

  7. Bend an aluminum wire loop as shown in the photo. It should fit inside tin mold.
  8. A piece of twisted wire.
     
  9. Squeeze hot glue inside the aluminum mold. Be careful as the aluminum mold will get hot. Insert the bent aluminum wire so that the loop is above the hot glue surface. If the aluminum mold is slightly distorted, then correct the shape and hold until the glue hardens. Use a piece of rag or a glove as the hot glue mold will be hot. Wait for the hot glue to harden well.
  10. Attaching the loop to the button.
     
  11. Remove pieces of duct tape and excess hot glue.
  12. Round off the corners a little: beat a little with a hammer in the corners.
  13. The completed shank button.
     
    Advertisement

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

In This Page
Categories
Crafts Recycled Crafts OtherAugust 20, 2021
Pages
More
🍂
Thanksgiving Ideas!
🎃
Halloween Ideas!
Facebook
Pinterest
YouTube
Instagram
Contests!
Newsletters
Ask a Question
Share a Post
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2022-10-25 20:05:14 in 2 secs. ⛅️️
© 1997-2022 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Shank-Button-from-Old-Aluminum-Can.html