social

Curling Iron Traveling Bag


Silver Post Medal for All Time! 306 Posts

Not knowing what to do with an odd flannel pillowcase, I decided to make a travel bag that I could put my hot curling iron in. Craft Project: Curling Iron Traveling Bag

 

Approximate Time: 1 hour

Advertisement

Supplies:

  • flannel pillowcase or 28 x 20 inch piece of heavy flannel
  • 24 inches of two different ribbons
  • sewing machine

Instructions:

  1. Whether using a pillowcase or fabric, cut a rectangle 28 x 20 inches. Fold your fabric in half so you end up with a 14 x 20 inch rectangle, right sides together.

  2. Use the pattern photo as a guide; make a curved cut on the top left corner (see photo) and two curved cuts, on the other 14 inch side, ending approximately 2 inches down. Starting at this point, continue with the second curve ending with a straight 8 inch side on the second 14 inch side. I used a dinner plate for my curve; this is only a suggestion for the curves any angle will work.

  3. pattern
     
  4. Advertisement

    Sew an 1/8 inch seam around from the folded edge around to within 6 inches of the other folded edge.

  5. Turn right side out, turn in the un-sewn 6 inch and finish the 1/8 inch seam.
  6. Once that is done fold the edge (A) with the single curved cut over to the center (B) of your fabric; sew from the bottom of the curve to the fold.

  7. Fold the remaining fabric completely over the first half (C will line up with A) then fold that part that is left overlapping (D will line up over B) back accordion style to match up with the right side.

  8. Pin your ribbon ties in-between the layers just below the (D) curve. Pin both edges and stitch down from where the curve ends across the bottom and back up to where the curve starts.

You now have a place to slip your hot iron in the back compartment, the folded cord into the second and a brush and comb in the front compartment and not have to wait for them to cool to put them in your suitcase. closeup

 

By Ann from Loup City, NE

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

 

Bronze Feedback Medal for All Time! 186 Feedbacks
April 7, 20100 found this helpful

I have never heard of doing this without adding a layer of teflon type cloth on the inside. I think that is what it is called.

Advertisement

It is the silver fabric that some ironing board covers are made out of.

 
February 8, 20110 found this helpful

I love what you've done! Looks great.
I've seen the various items with the "Teflon" fab in them as well. I'm not sure what the point is though, do any of you?
If your not going to be handling it after you put it in the holder; why waste money on the expensive "Teflon" type, reflective lining? I would think once it is unplugged and in the holder, it shouldn't be too hot for careful handling anyhow.

 

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

 
In This Page
Categories
Crafts Sewing How ToApril 7, 2010
Pages
More
👒
Mother's Day Ideas!
🐛
Pest Control
🌻
Gardening
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-04-15 09:18:25 in 3 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/tf36566024.tip.html