There are 2 things that baffled me for a long time. How to clean the outside of a cast iron frying pan and get a waffle iron seasoned after being washed. My mom said, "In Scotland we put the frying pan in the fire." works like a charm to take away all the crud from outside. Just re-season by placing oil inside and leaving it in a 200 degree oven for 1/2 hour or so. Apparently a self cleaning oven will do it too.
As for the waffle iron that has been washed, or scorched, no fear. Fill it with salt and heat it for 45 minutes to an hour. It can be repeated if necessary. I always have coarse salt left after pickling, afterward I throw the salt on the ice outside if it's winter. Never throw salt on cement though. It eats the cement.
By Siris from Dawson Creek, BC, Canada
I never use soap and water to clean cast iron. Instead, I pour in baking soda and salt then scrub as if I were using SOS or Brillo. It's easier if the pot is still slightly warm, but will work in a cold one as well. After all the burnt bits are gone, I wipe out the pot with a dry cloth until all the salt and soda are gone, then spray with Pam. Remember to spray the lid, too. (09/28/2006)
If you want to bring your iron pots back to like new, get some Red Devil Lye. Put this in 5 gallon bucket with warm water. Be very careful and use gloves. Place your pots in this solution for a few days. Take them out, using gloves, and look. Rinse with water hose. If all the goop is off take inside and scrub good with Dawn dish liquid. Rinse well. Put on heat to warm up and then grease as usual. When hot, put under cool water. Dry good and repeat heat treatment. I have cleaned hundreds of cast iron pots using this method. I go to yard sales to find them and give them away like new again. I hope this helps you to get new pots again. (09/28/2006)
This is an algorithm I use for cleaning my cast-iron skillets. As a general rule I never use any soap, detergent or any chemicals. These will not only strip away all of the seasoning, but they will also absorb into the iron and (in my humble opinion) ruin the skillet. I never use water, either, but use oil instead. Water can lead to rusting. Iron is a porous metal and will absorb anything it comes in contact with. The idea is to fill those pores with oil from foods. That is what "seasoning" is.
An important note: if you use the camp-fire embers method, be sure to heat your skillet first before putting it on the embers. Just kick a few embers off to the side and put the skillet on them. Then when it's hot, put it face down on the ember bed. If you put the skillet on the embers while it's cold you can warp the skillet or crack it. If the skillet warps, the cooking surface will be uneven and oil will drain off of certain parts while you cook leaving them bone-dry. This will cause food to stick to those parts.
You will probably get as many different opinions as people asked when it comes to how to clean an iron skillet. This is just my method. But no matter what, do not use soap, detergents or any other chemicals. (05/11/2008)
By Alex K.
Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!