New Home Janome #525B Won't Stitch?My machine is running, but it won't sew.
Riding Mower Won't Start?I have a 22hp twin ohv Intek Briggs and Stratton motor on a riding lawn tractor. When I try to start the motor it will pop from the air intake and not fire. What might be the problem?
Kenmore Machine Stops Sewing with Pedal Down?I have Sears Kenmore Sewing Machine Model 385. 1884180. How do I fix the speed control? It'll start sewing then it would stop when I still have the pedal down. This is the second pedal that I have bought for this sewing machine. I have oiled what needed oiling and it still doesn't work properly.
Empisal Overlocker Is Not Stitching?My Empisal overlocker's foot is not moving. It makes the noise but no movement. I've been unemployed for more than a year, I'm 55 and I'm single. I am doing needlework for an income till I find a job. I can't afford to take it in for repairs I barely make enough to survive. Can I fix it myself?
Husqvarna Riding Mower Won't Start After Hitting Something?It's a Husqvarna riding mower. I ran over the metal gutter on the ground from the house. The engine will attempt to start and when I turn the blade on it won't even turn over to start at all. Like it's nothing. The blades looks fine though. And also the belt does look a little loose. I am not sure if it's suppose to be that way.
Parts List for a Sears Reel Mower?I have a Sears model 536-81803 with Briggs motor. Would anyone know how to find a parts list for this reel mower?
Craftsman Mower Won't Shift If Brake Depressed?I have a Craftsman DYT4000 riding mower. I just replaced the deck and drive belts on my mower. I went to test the mower. I started the mower and pressed the brake pedal and put it in reverse. The mower shifter locked in reverse at this point with the brake pedal pressed I could not shift out of reverse. I let off the brake pedal and while moving I was able to shift to neutral or any other gear.
Trouble Starting a MTD Riding Mower?My MTD mower rider will start with the drive belt off, but when I put the drive belt on it just jerks and will not turn over. I would really appreciate some help with this issue. I have replaced the starter, replaced the battery, and checked for loose wires.
Riding Mower Won't Start?Do I need power out of both posts on my solenoid for my mower to crank over?
Troy-Bilt Lawn Mower Stopped Running?My Troy-Bilt lawn mower just stop running. The battery is good.
John Deere 110 Won't Start?I just bought 1972 John Deere 110 garden tractor from a guy. He said he didn't know what was wrong with it and didn't want to fool with it. I am new to these older mowers, but when turning the ignition the mower will turn over no problem, but won't fire. Any ideas on where to start?
Lawn Tractor Won't Start?It's got a new starter, battery, and solenoid, and it will crank, but only so far, then the flywheel binds. I can turn it by hand, but it's difficult. It was running fine last week, and has all summer. Any idea what is causing this problem?
Singer Sewing Machine Feed Dogs Not Working?I have a Singer tradition 23 stitch sewing machine. The teeth on the machine are not feeding the fabric. The wheel will not turn to move the teeth. It will move when winding bobbin. What can I do to fix it?
Repairing Foot Pedal on a Baycrest Sewing Machine?I have an old Baycrest sewing machine and there are 2 wires leading to the foot pedal that are supposed to be attached in little black electrical box but one of them is off and I can't tell where it should reattach. Can you send a picture of where the 4 wires attach in the electrical box leading to the power and the foot petal please?
Craftsman Riding Mower Won't Start After Hitting a Rope?I hit a rope with my Sears Craftsman riding lawn mower. I got the rope out, but now it is dead it won't start it does nothing.
John Deere 135 Riding Mower Not Starting?I have a John Deere 135 riding mower that won't start. The lights work and the hour meter works, but there is no sound at all. I checked the battery, changed the fuse, and filled with gas. It leads me to believe PTO cable or safety switch? Any other ideas?
How Do I Repair the Feed Dogs on a Toyota Sewing Machine?How do I repair the feed dogs on a Toyota sewing machine?
Riding Mower Won't Start?I have a Briggs and Stratton engine Model # 33R8770009. The starter engages when the key is turned, but it kicks right back out. It acts like a dead battery, but I just replaced the battery with a new one and my charger shows full charge. Any suggestions?
Repairing a Singer Sewing Machine Foot Pedal?My Singer sewing machine pedal is very stiff and makes a loud popping sound when depressed. It was a second hand buy so I don't know if this was an issue when it was new or not. Is there any way of fixing this?
Janome Sewing Machine Not Feeding Fabric?My Usha Janome Allure machine is not moving or stitching the cloth. We have checked all the parts. What are the possibilities? The machine is 7 years old.
Troy-bilt Mower Speed Control Lever Not Working?Why would a CVT Troy-bilt lawn mower with a 7 speed control lever not have any change in speed when the lever is shifted? The lawn mower is 15.5 hp motor and is only 3 years old.
John Deere L110 Won't Start?My John Deere won't even turn. I've replaced the battery, starter, and solenoid, but am still not getting back the power through the solenoid when I turn the key. What could be going on here?
Husqvarna Riding Mower Keeps Stalling?I have a Husqvarna yth2348, that was stalling shortly after it started. It acted like the choke was stuck, after tracing the choke cable it was not. I replaced the carburetor and fuel filter, but am still having the same problem. I have checked the vacuum on the fuel pump and it appears to be good. Any ideas?
Adjusting Needle Bar Height on Singer Heavy Duty 4452?I sew leather pretty often on my Singer heavy duty machine, so the timing goes out of wack constantly. Usually I'm able to fix the timing of the needle to the hook, but this time the needle doesn't seem to go low enough to catch the thread so I attempted to try adjusting it myself.
John Deere Mower Won't Start After it Tipped Over?My John Deere tipped over the other day. I set it back up, and continued to mow. It worked fine, outside of a little oil that leaked out. But, when I was done I turned it off and now it won't start at all. In fact, the headlights don't even come on.
Old Kenmore Sewing Machine Won't Stitch?My Kenmore 148.19370 sewing machine has power, but the needle bar (the part that should go up and down) won't budge! I took the machine's cover off, dusted and oiled it, but no luck. I can't even manually move it with the hand wheel. It is very old, but made the good old way, no plastic. Before I give up, any ideas?
Tecumseh Murray Riding Lawn Mower Won't Start?I have a Tecumseh 20/42 Murray riding lawn mower that won't start. I have replaced one of the coils because of no spark, rebuilt the carbs, and replaced all the fuel lines. I now have spark, compression, and fuel, but it still won't start. Any help will be appreciated. Also I was mowing the yard when it shutdown.
Repairing a Toyota Sewing Machine?I have a declutch problem on my Toyota Quiltmaster sewing machine, it is making a growling noise and jerking when in sewing mode.
Vintage Kenmore Sewing Machine Has Noisy Shuttle Hook?I have a vintage Kenmore 1802 with a noisy shuttle hook. There are no mechanical issues. It sews just fine. It has been cleaned and oiled and recently re-greased the gear box. The machine is quieter, but there is a noisy clicking rattle in the shuttle.
John Deere Riding Mower Won't Start After Hitting Barbed Wire?I ran over some barbed wire with my John Deere D170 while mowing. The motor stopped. I unwrapped the wire from the far right spool. Now, it won't start and won't turn over when the key is cranked. Any ideas?
MTD Riding Mower Keeps Stalling?My MTD ride on lawn mower runs great, but quits when I let the clutch out. It is model 13ab662f516 13.5 HP in perfect, hardly ever used shape.
John Deere Mower Won't Start?I have a John Deere zero turn mower that will not turn over. I replaced the battery and all I get is a small clicking noise or nothing. I tried jumping terminals on the solenoid and I get a spark, but it does not turn over then either. All the fuses I can find seem to be okay.
Janome 4816LE Reverse Stitch Doesn't Work?My reverse stitch button stopped working. Is this something I can repair?
Ride On Mower Won't Crank?I just recently cleaned out the carby on a 13hp Briggs and Stratton ride on and tipped the mower on its side to sharpen the blades, (spark plug on higher side). A fair bit of oil went through the carby, but I cleaned it out well. I put everything back together and it does the 1 click when turning it on, but won't even turn over? Can anyone help me out please?
1996 Craftsman Riding Mower Won't Start?I have a 1996 Craftsman riding mower. It turns over like crazy, but there is only a very, very weak spark, if any. I tried a new coil, and have good compression. Set the new coil so many times. I am just at a dead end.
Cub Cadet 2130 Won't Start?I've been having a problem with my PTO cutting out. It happens once I've been running it for about a half hour and when I put it in reverse. This is a new problem, I've had this mower for about 10 years. Last week when I was cutting, the mower sputtered and died. I assumed I was out of gas, but I wasn't.
Tang 15 Needle Embroidery Machine Not Stitching Properly?I have a Tang 15 needle embroidery machine. I have been waiting 9 months for a mechanic to fix it. It sews approximately 30 stitches then stops. I've checked threading and the bobbin, but no luck. The mechanic has my book.
Singer Sewing Machine Runs Without Foot Pedal?My Singer sewing machine continues to run even when I take my foot off the driver. What can I do to fix it ?
John Deere Tractor Won't Move After Hitting a Stump?I have a LA 105 John Deere tractor. I hit a stump and now the tractor will not move. The tractor engine starts up and runs fine. The mower deck runs fine. It just will not move when in gear.
New Craftsman Riding Mower Won't Start?I have a brand new Craftsman R110 riding lawnmower that was delivered and will not start. It does not click or make any sound. I've checked the battery voltage and it appears to have a full charge. Any other things I can check? It has new oil and new fuel.
Riding Mower Won't Start?New basic stuff. It mowed great. All of a sudden it shut off and won't start. I noticed on the left side near the engine a slim silver cable with a bend in it is poking out. When I move the throttle it moves. It looks as if it was once attached to something (perhaps curled around and/or wrapped on the end). The throttle cable appears to be fine. This is the only abnormality I can see.
John Deere Mower Won't Shift After Hitting Something?I have a John Deere mower (used). I was mowing and did pay attention to how close I was to my stair. Apparently I hit it and now the mower won't shift into gear? Any suggestions as to how or what to do? I am no repair person, but can do some basic stuff or YouTube ideas? Also the brakes suck and I was wondering if they can be tightened or adjusted?
Craftsmen LT2000 Riding Mower Won't Start?My mower was running normally when smoke started to come out of engine. Now it won't crank over. All fluid levels are full and normal.
Steering Wheel on Yard Machine Mower Won't Turn Right?What should I do when my Yard Machine's steering wheel cranks and does not turn to the right.
Husqvarna Mower Won't Start After Hitting a Rock?I hit a rock with my Husqvarna riding lawn mower. Now it won't start.
Downloadable Manual for a Brother Charger 651?This old Brother Charger 651 sewing machine we bought at auction as a machine for the heavier work, seems to have issues with tension, so we are looking for an owner's manual and/or a service manual.
Janome Sewing Machine Won't Turn On?I tried to power on a new Janome 7330. It came on and went down and refuses to come on again.
Riding Mower Idles But Won't Move?I have a Cub Cadet that is 12 years old. It was tuned up and normally runs beautifully. Today, as I turned a corner, it stopped moving forward. It starts up and idles, but will no go forward or backwards. The three belts are all there - none broken off.
Huskee Riding Mower Won't Restart After Use?My Huskee mower is a gem that starts on the first try every time, but if I stop mowing then try to restart it, about 75% of the time it won't restart. I'm certain it's flooding out. Sometimes it takes overnight to restart. Today it did something different, I was mowing along and I tried to increase my speed, but accidentally over slid into choke mode and it killed and won't restart.
Repairing a Janome Presser Foot Lever?I accidentally pulled the black presser foot lever down and now it has fallen off followed by another little black part with a wire bit. It's a Janome 5030.
Cause of Uneven Loose Stitches?My Sears Kenmore 158.17033 is not making even stitches and the bottom stitches are loose. What can the problem be?
Cub Cadet Won't Start When Engine Warm?My mom's Cub Cadet RZT starts when it is cold, but won't turn over after she has mowed with it.
Reverse Lever on Kenmore Sewing Machine Stuck?The reverse lever on the front of my Sears Kenmore 158. 14301 sewing machine has 'frozen up' and will not move! I have completely oiled it, as it has been setting for over a year with no use on it. Never once in the past did that lever not work!
Restoring an Old Craftsman and a Moto Mower Reel Mowers?Wondering if anyone has any information or manuals or anything helpful related to restoring these mowers? One is a Craftsman and the other is a Moto Mower, gas powered reel mowers.
Bolens Riding Mower Won't Crank?My Bolens riding mower won't start. It has spark. I can squirt gas into the cylinder, screw the plug in, and it still won't start. It does have plenty of compression.
Pfaff Sewing Machine Jamming and Not Stitching?My Pfaff sewing machine won't sew more than a few stitches then it halts and does run, but does not stitch. I have changed the bobbin, rethreaded, and cleaned my machine and it starts to sew a few stitches, jams, and continues with no stitches. What am I doing wrong? It worked yesterday.
Toyota ECO26B Sewing Machine Stuck in Reverse?Why is my machine only sewing backwards?
Brother Machine Sewing in Reverse?My Brother sewing machine, model XR3774 started sewing in reverse. Can anyone tell me how to fix it? Does anyone have manual with pictures or anything?
Stitches Bunch When Using Even Feed Foot?I have a Babylock sewing machine which doesn't seem to like even-feed feet. (I have tried three.) It will sew about one inch and then bunch up the stitches very tightly. Should I change the tension when I put on this foot? Lengthen the stitch? I want to use this foot to quilt and am getting very frustrated.
Cub Cadet LT46 Won't Start When Cold?My Cub Cadet LT46 won't start when the mower is cold. I have to crank it for several minutes to start it. Once I get it started, I usually don't have a problem getting it to restart. I bought it used with just 60 hours on it. How do I solve this problem?
New Home Sewing Machine Won't Reverse?My New Home sewing machine (circa 1990) will not sew in reverse when I hold the lever down? Any ideas on how to fix this?
Snapper Riding Mower Keeping Dying?We have a Snapper rear engine riding mower. When we let the clutch out - the motor dies.
Replacing the Solenoid in a John Deere D105?I just replaced the starter solenoid on my riding mower. There are two safety switches to plug in to it, one wire is purple the other is black or gray I believe. I'm not sure which one to plug into each side.
Sewing Machine Not Stitching?I own a Carina Professional computer sewing machine and today I am in absolute despair. I've been trying for hours to troubleshoot the problem.
Replacement Part for a Pfaff Sewing Machine?What is the black, round disk about 2 1/2" in diameter called in the Pfaff 0100A (lavender) sewing machine? It broke and we need to find it. Also there is a pin that fits into it?
Repairing a Vintage Singer Sewhandy Toy Machine?How do I repair a faulty stitch regulator on a Singer Toy Sewhandy sewing machine model number 20-10?
Craftsman LT1000 Riding Mower Won't Start?I replaced the solenoid and starter. When I turn the key I am only getting a clicking noise from the solenoid. I've got power at the solenoid.
Longarm Sewing Machine Error Code?My TinLizzie18 is sick. It turns on, gives the error code "uC", and then the screen turns to the normal "start sewing" screen. When I press the foot pedal, the machine moves lightening fast. I can't make it slow down (releasing the pressure on the foot does nothing. Changing the speed does nothing.) The only way to stop it is to turn it off. The TinLizzie company has since gone out of business.
Repairing a Troy-Bilt Mower Blade Lever?The lever to engage the blade on my Troy Pony riding mower doesn't work.
John Deere D170 Won't Start?My daughter borrowed my riding mower yesterday. She was mowing with the throttle at a low speed and the lack of lift resulted in the bag chute filling up. I went to start the mower up and nothing. I checked the regular culprits (brake lock, mower engage lever, seat sensor). I checked the battery, cleaned the ignition harness and wires, cleaned the brake override harness, and still nothing.
Repairing a Janome Sewing Machine?My Janome machine has no power.
Pfaff Sewing Machine Needle Stuck on Zig Zag?I have a problem with my Pfaff 138 sewing machine. The needle position is stuck on zig zag, the dial can be adjusted and there's a slight change in the width of the zig zag, but when the dial is set on middle position and '"0"' it results in needle position to the right and still zigzagging.
John Deere L110 Mower Won't Start?I used my mower last week and today there is nothing, no clicking no turning to start, total quiet! The light does come on. I took the seat apart to get to the kill switch and manually depressed the button, while depressing clutch to activate and still nothing. I am not much of a mechanic so I think I am close to trying to load it into my truck and taking it to local repair shop!
Yard Machine Riding Mower Won't Start?I have a Yard Machine riding lawnmower that won't start. It has good gas and the oil is good. So id the battery. It turns over strong. The only way to get it to fire off is to either pour gas in the intake or cover the intake to restrict the air from intake, but it will die as soon it it fires off. Fuel is in carb bowl and it's been cleaned.
John Deere D150 Riding Mower Won't Start?I just cut 2 acres with my JD D150 and the mower ran great. I decided to cut a patch through the waist high grass and the mower just stopped. It will not start? The headlights work, but it will not turn over.
Repairing a Troy-Bilt Riding Mower?I have a Troybilt zero turn mower. When I back up and then go forward again my blades have now just started this where they either take a very long time to engage or not at all. They engage just fine if I am only going forward. Any ideas?
John Deere Riding Mower Won't Start?If I jump the solenoid my 15hp John Deere it will start, but as soon as I take my foot off the brake it dies. It has a new solenoid on it. When I turn the key nothing happens.
Manual for a Brother Model Galaxie 2015?I cannot find the manual for this machine on Brother's website or any other site from my google search.
Repairing a Tailor Sewing Machine?I was replacing the upper tension on a Tailor 935 FA, how do I put it back together?
Husqvarna Riding Mower Won't Start?My zero turn Husqvarna rz1306 will not start. I have put in a new plug, cleaned the magneto, added new gas, and cleaned the carb. It turns over and over. It appears to not be getting gas in the carb, but still won't start even with starter fluid.
Adjusting the Upper Tension on a Janome Sewing Machine?I am having problems adjusting the tension on my Janome mc9500. The upper is loose and I have tried everything that I can think of.
Sewing Soft Leather on a Brother Industrial Machine?I have been sewing cotton materials and even denim materials all with excellent stitch quality. I have now selected quite soft leather to sew and can't produce a stitch. The material feeds through the machine in the usual way, but only makes holes. I have tried various tensions that do not make any difference. When I revert to the cotton fabric hey presto all is good - help!
Drive Belt Route Diagram for a Murphy Lawn Mower?I am looking for a routing diagram for the drive belt on a Murphy lawn mower.
John Deere Riding Mower Dies When Giving it Gas?My John Deere 160 runs great as long as it idles, but it dies as soon as I try to give it gas.
Yardman Lawn Tractor Won't Start?I have a 1991 Yardman lawn tractor, that will not turn over. There is no electric. I changed the key switch and solenoid. It still won't turn over. I can jump start it directly to the solenoid.
Simplicity Lawn Tractor Keeps Stalling?I have a Simplicity lawn tractor from about 2010 with a 24 hp B&S engine. It ran for awhile and quit. I have always used airplane gas, no ethanol. Last time my son put in regular gas and now it won't run right. I think it is a safety switch. Is there a way to get rid of all the safety switches?
Repairing a Juki q2010 Sewing Machine?Juki feed dogs don't come back up and can't use reverse, it is frozen.
Foot Pedal Not Working on Sewing Machine?The foot pedal worked for like 5 seconds then stopped working, but the machine light still works. I took the pedal apart and didn't find any problem with it. I replaced just the foot pedal with the same wire and it is giving me the same problem. It worked once or twice for like 3 seconds then stopped working. Could the problem be with the cord that sends the power to the foot pedal?
Foot Controller Not Working on New Home Sewing Machine?I have a problem with a My Style Computer 826 New Home sewing machine by Janome. When plugged in it powers up and I get the usual welcome 'beep', display lights up and stitch 10 is indicated. However, when I use the foot controller, nothing happens at all. I checked the controller on another machine and it works fine. I suspected the motor initially, but I'm not so sure now.
Broken Reverse Lever on Singer Concerto 3?I was using my Singer Concerto 3 today and when I pulled the lever to reverse stitch to finish off, it broke. I need help on how to get into the machine. I unscrewed the screws at the top of the machine and nothing happened.
Riding Mower Dies When Put in Gear?When starting up my Husqvarna riding mower I hold in the neutral pedal on the left it starts up, but it won't drive forward nor in reverse. When I let go of that pedal or engage the blades it dies. What's the problem?
Installing a Belt on a Gammill Statler Longarm Quilting Machine?I can't figure out how to install the belt system for the Y axis on my Gammill Statler Optimim longarm quilting machine.
Connecting Rod Broke on a Craftsman LT2000 Riding Mower?I have a 2014 Craftsman LT2000 riding mower with Platinum 21 HP Briggs and Stratton engine. I can not figure out why the connecting rod broke. It had oil. I am being told it's due to lack of lubrication.
Repairing a Troy Bilt Riding Mower?My Troy Bilt Pony won't run unless I hold my hand over the intake where the air filter is.
MTD Riding Mower Won't Start?I have a MTD l42 riding mower. When trying to crank, the solenoid keeps clicking when cranking.
Craftsman Riding Mower Won't Start After Hitting Something?The blade of my tractor get struck with something and then it shut down. Now I tried to start it and it is just clicking and nothing happens. Is it possible about the flywheel key? Or I blew up something else? Any ideas?
John Deere 125a Won't Start?I have an 2006 John Deere 0125a riding mower that powered down while mowing. I noticed the oil drain tube was gone. We got a plug and refilled the oil and could not get mower to start. We replaced the fuel filter and the 2 armatures as well as new plugs and still can't get it to run.
Kenmore Machine Skipping Zigzag Stitches?I have a Kenmore Ultra Stitch 10 and I am unable to use the zigzag stitch on certain fabric. I am making a bathing suit and the zigzag stitch does not work. I am using a ball point needle, I've try all sizes, 14 seems to be the best, but it's always skipping stitches. This does not happen for a regular stitch.
Craftsman Riding Mower Won't Start?I have a Craftsman 22 hp riding mower. This spring it would not start, I replaced the battery with a min 230 cca. I have power to the starter, but the flywheel does not engage. I have now replaced the starter with no change. I also replaced the ignition module. Ay thoughts? Is it possible the battery is not powerful enough?
John Deere Riding Mower Stalls When Blades Engaged?My John Deere ride on mower rides fine, but as soon as I engage the blades it stutters and stalls. It is driving me around the twist. Can anyone please help?
Kenmore Machine Won't Sew?My Kenmore 158.17031 sewing machine runs like it is filling a bobbin. The needle won't go up and down, but the motor runs and belts move and the bobbin winder moves. What do I need to do to get the machine to engage and run?
Kenmore 1703 Sewing Machine Won't Sew?My daughter bought me a Kenmore 1703. It is a nice machine, the bobbin winder works, but I can't get the needle to go up and down with the foot pedal. The belts turn, but there is no machine action. I can raise and lower needle by hand turning the wheel. How can I fix this problem?
Poulan m6.25 Mower Won't Start?The throttle cable doesn't seem to do anything'so I can move the starter bar back and forth like it's not connected.
Riding Mower Won't Start?Mower won't turn over after cutting.
Needle Won't Move When Presser Foot Down on Singer?I inherited a Singer machine from my mum. Recently I noticed that when I push the presser foot lifer up the needle works, but once I push the press foot lifter down it won't work at all.
Husqvarna Riding Mower Won't Start?I have a Husqvarna pz5426 riding mower. The main fuse broke off (deteriorated looking). How can I get the rest of it out, or am I gonna have to take that 3 fuse box out and replace? Also there is another place for a fuse right beside it, however it is not labeled. 25 p wiggles. Is it an auxiliary main?
Blades Won't Engage on a Troy Bilt Riding Mower?The blades on my Troy Bilt riding mower won't engage.
Repairing a Troy-Bilt Lawn Tractor?After hitting a metal pipe in the ground with my mower the motor cuts off when engaging the blade and steering is difficult.
Memory Craft 6000 New Home Bobbin Winder Not Working?The bobbin winder spindle will not turn after pushing it into place. I have dusted and completely disconnected from a power source. Once the bobbin is in place and I have pushed it against the stop, it will not turn when I step on the foot pedal. Everything else on the machine works perfectly.
Craftsman YS4500 Riding Mower Won't Start?I was mowing and stopped to pick up some sticks, when I got back on and tried to restart the mower there was nothing, no sound of turn over, nothing. I took the battery in and they said it needed to be replaced, so I bought one and put it in, still nothing! What do I do?
Troy Bilt Push Mower Won't Start?My Troy Bilt mower TB110 model won't start. It doesn't seem to get gas.
Riding Mower Won't Start?My riding mower won't start. It has fuel, a new plug, fire, turns over, new coil, and fuses. It ran great, sputtered, and shut off. It has new fuel filter. The fuel runs to the carb, no clogs.
Husqvarna Mower Won't Start?I have a Husqvarna LGT2554. It's getting gas to the carb and won't start, but if I pour gas in the air intake it will fire.
Sewing Machine Continues to Sew?My New Home sewing machine 6000 is having issues. When I stop sewing the machine starts to sew again by itself.
