Child's Patchwork Pillow With Handle

I wanted to make my own version of a craft posted here on Thriftyfun back in 2009, see the original project here: Handle Pillow

Rather than make a pillow form using the final fabric I chose to make a muslin form and then sew up a removable cover with the handle incorporated into the cover. Here is that project: Small Handmade Pillow Form. This is the result.




  1. I first sewed together, end to end, a variety of the 2 inch wide strips.
  2. Next I began cutting and piecing together a rough rectangle that would need to be 6.5 x 8.5 inches (including seam allowances). I wanted my strips to run top to bottom rather than side to side, so I sewed the strips together that way.
  3. Once I had finished sewing together enough strips to make the front of the pillow cover, I pressed the seams on the wrong side and right side of the piece in preparation for cutting out the block.
  4. Advertisement

  5. Make a paper template 6.5 x 8.5 inches. You will use this to cut out the front piece for the pillow cover. I reused the same one I had made for the pillow form.
  6. I laid the pieced block over the pillow form to make sure I liked the arrangement of strips. This is a step you can skip if not piecing your cover front.
  7. Now pin the pattern/template on the block and cut out the pillow case front.
  8. Advertisement

  9. At this point I decided to double stitch the strips together for greater strength.
  10. Next make the template for your pillow back. I like the envelope style. I decided to have a 2 inch overlap and drew the pattern accordingly. Mine was 6.5 x 5.5.
  11. Cut two pillow backs from your chosen fabric. I used two different fabrics to continue the patchy overall effect.
  12. Pin a 1/4 inch hem on one long side of each back piece. Sew.
  13. Advertisement

  14. With right sides together pin and sew the two pillow back pieces to the ends of your pillow front along the 6.5 inch sides. Note: I double stitched these seams as well. They should overlap 2 inches in the center of the back.
  15. Now with right sides together you will begin sewing the top and bottom edges of the pillow back to the front. I lined up the 2 inch overlap and pinned it at the top and bottom, to itself. Then I pinned and sewed the bottom edge taking a 1/4 inch seam (double stitched).
  16. Before sewing the top edge you will need to make and place your handle. For the handle, I used a left over piece of the bias quilt binding from a quilt I made for my most recent grandson. I stitched along the open edge of the binding and then chose the section of color that I liked the best and cut a 10 inch piece to use for the handle.
  17. Advertisement

  18. Turn the pillow cover right side out temporarily to place the handle. The ends of the handle will be sewn into the top seam, so for this step the handle loop will be away from the edge of the cover. I measured in from the sides 1.5 inches for the placement of the handle. Pin the handle ends in the seam allowance of the front piece only, being careful not to catch the pillow back in your stitching, and sew forward and in reverse to attach.
  19. Turn your cover inside out again. Making sure that the handle will not get caught in your final seam, pin and stitch the top edge of the cover. Clip the corners.
  20. Advertisement

  21. Turn the cover right side out and put pillow form inside. Your child's pillow with its convenient carrying handle is done.

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!


In These Pages
< Previous
Crafts Baby ItemsSeptember 3, 2014
Pest Control
Back to School Ideas!
Summer Ideas!
Coronavirus Tips
Ask a Question
Share a Post
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2020-07-16 01:54:59 in 3 secs. ⛅️️
© 1997-2020 by Cumuli, Inc. All Rights Reserved.

< Previous