I have a Scrubbing Bubbles Automatic Shower Cleaner. The nozzle rotates, but the cleaning liquid doesn't come out. How can I unclog it?
By Luis Herrera from Miami, FL
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Try soaking the nozzle in vinegar for a couple of hours.
take a t10 torx screwdriver to remove the 6 screws on the bottom, get a plastic syringe tube and attach it to the two removable tubes and push water or vinegar through it to unclog the unit. it is likely due to lack of use and mold inside the two tubes one of which has a one way filter attached. Hope this helps someone who still has one of these units. I just fixed mine. this will work so long as the motor is spinning. after the cleaning with the syringe, you should be able to manually move the gears and see liquid coming out. if no liquid comes out then you may have a leak in the pumping mechanism attached to the gears. However, you will have noticed liquid collecting inside the sealed assembly after you open it and corrosion in that case.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
I have the Scrubbing Bubbles Automatic Cleaner for the shower. I purchased it about two years ago, but haven't used it for the last year because it wasn't working. I finally had time to take a look at it. After playing around with it quite a bit, I was finally able to get the motor running and the nozzle spinning each time I press the button.
By Marla from MO
I have a Scrubbing Bubbles Automatic Shower Cleaner. The nozzle rotates, but the cleaning liquid doesn't come out. How can I unclog it?
By Sandy from Memphis, TN
