social

Moving A Grandfather Clock?

A tall grandfather clock.I am in a situation where I need to move this clock tomorrow and need advice on how to protect the inner parts before moving. I know I need to remove weights and pendulum, what else do I need to do? Thank you for your expert advice!

Advertisement

A close up of a grandfather clock.
 

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 

Silver Answer Medal for All Time! 425 Answers
May 12, 20210 found this helpful
Best Answer

Removing the weights and pendulum are very important. After that, I would bubble-wrap the whole clock -especially the glass doors areas, then wrap the clock in a couple heavy quilts, blankets, comforters, or similar, and then tie the whole mess fairly tight with heavy twine or rope to make it easier to handle. Of course a nicely padded spot to ride it on it's back is a plus. Good luck.

 

Silver Answer Medal for All Time! 440 Answers
May 23, 20210 found this helpful
Best Answer

1. Inspect your grandfather clock, check its wooden case for cracks or other types of damage. Weakened areas or damaged parts can lead to more serious problems during the moving.

Advertisement


2. Protect the cables of cable-driven pendulum clocks.
Put on cotton gloves, open the front glass panel and stop the clock pendulum from swinging. Insert several folded pieces of packing paper above each pulley holding the cables and wind up the weights all the way to the top.
3. If you own a chain-driven grandfather clock, then protect the chains. Stop the pendulum from swinging and wind up the weights halfway, about three-quarters of the entire length. DO NOT pull the weights all the way. Insert cable ties just below the sprocket of each set of chains, then fix those ties in place.
4. Gently unhook each clock weight.
5. See on bottom of each clock weight whether its been pre-labeled.
If its not marked, then label each weight correspondingly - Left, Center or Right.
Advertisement


6. If youre moving a chain-driven grandfather clock, then secure the hanging chains. Wrap the chains together in soft packing paper to form 3 distinct sections along their entire length top, center, bottom. Then use tape to secure those mini paper bundles together.
7. Remove the side panel and get a hold of the pendulum guide, with the other hand lift up the pendulum, gently and slowly in the front section, until it unhooks from its guiding mechanism. Do not use more force than its necessary.
8. If your grandfather clock has chime rods, then protect those rods. Add small pieces of bubble wrap between the rods, then use tape to fix the protective material.
9. Remove glass shelves. Remove wooden ornaments which can be removed safely, and look too fragile to survive the move unscathed. Pack every thing in packing paper first, then in protective blankets.
Advertisement


10. Re-install the side access panel of your grandfather clock and lock it in position.
11. Pack the pendulum and each weight individually so that they wont be able to touch. First in packing paper first, then wrap them with thick moving blankets.
12. Cut out cardboard pieces that match the shape and dimensions of each separate glass section, then place the cardboard over those easily breakable areas of the floor clock. Use painters tape (masking tape) to secure those cardboard cut-outs without leaving nasty glue marks on the glass surface. Add an extra bubble wrap layer over the cardboard one.
13. Wrap the entire body of the big clock in moving blankets. Use packing tape to secure the blankets.
14. Move and load the grandfather clock onto a dolly with help of a couple of helpers. Use the two-wheeler that is used for moving heavy and tall household items such as refrigerators, washing machines and so on. Secure the heavy load onto it.
Advertisement


15. Keep your grandfather clock upright while youre wheeling your grandfather clock out of your home. Wheel up the utility dolly along the loading ramp to get it inside the back of the moving van. Strap well the grandfather clock to the side to restrict any unwanted movement during the relocation trip.
16. Move in new house and re-assemble your grandfather clock by following these steps in reverse order.

 

Gold Post Medal for All Time! 677 Posts
May 12, 20210 found this helpful

You have to take the weights and pendulum out. Then wrap the rest of the clock as you would any other fine piece of furniture that you want to protect.

 

Gold Feedback Medal for All Time! 949 Feedbacks
May 13, 20210 found this helpful

Moving a grandfather clock is a really big job and it will take more than one person to do this.
A lot depends on the actual type of clock as some are more elaborate than others so be sure to check out more than one set of instructions before you begin.

Advertisement

I believe you should read what professional movers say to do so I have listed some sites and at least one of those should be good for you:
www.youmoveme.com/.../how-to-move-a-grandfather-clock-like...
www.youtube.com/watch?v=LmWBjCFPzRU
www.youtube.com/watch?v=vakbWQx0N7s
www.moving.com/.../

 
May 14, 20210 found this helpful

I sincerely thank you for your response. Most helpful. I moved the clock into its new home yesterday, tye clock is now in MY home and its beautiful.94 tall.. its massive and GORGEOUS!! Thanks again!

 
 

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 
In This Page
Categories
Consumer Advice Collectibles Clocks GrandfatherMay 12, 2021
Pages
More
🍀
St. Patrick's Ideas!
🌻
Gardening
🐰
Easter Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-02-19 04:19:17 in 2 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Moving-A-Grandfather-Clock.html