Here are the recent answer to this question.
By Jerome F. (Guest Post)10/31/2008
Need a general cleaning agenda to clean NEW kitchen table top.
By Kevin (Guest Post)12/15/2007
How do I remove pen ink from marble table top?
By vince (Guest Post)07/07/2007
What about moisture stains, from ice.
Thrifty Fun has been around so long that many of our pages have been reset several times. Archives are older versions of the page and the feedback that was provided then.
How do I clean stains from a marble top table - cheaply & effectively?
By PoPo the Po
Make a poultice from white absorbent material such as a napkin, blotter, paper towel or facial tissue, dampened with the chemical recommended below to dissolve that stain; or mix whiting with that chemical to make a soft paste to cover the stain. The poultice should be left on the stain from 1 hour up to 48 hours, depending on the age and depth of the stain. Plastic wrap, held in place by masking tape, can be put over the poultice to keep it damp; otherwise it will have to be re-dampened with the chemical periodically. Mix only enough poultice for immediate use; mix a second batch later if another application is needed.
Organic Stains: Tea, coffee, colors bleached from paper, textiles or soft drinks. Make poultice soaked with 20% peroxide (hair bleaching strength) and a few drops of ammonia.
Oil Stains: Oil stains may include butter, hand cream or lotion. As soon as possible, spread surface with an absorbent fine powder such as whiting or even corn starch. After short time brush to remove and reapply more powder. Let stand 24 hours. To remove: Scrub with hot, sudsy (detergent) solution and stiff brush. Or wipe with ammonia-dampened cloth. In either case, then rinse and wipe dry. If these alkaline solutions don't remove all the oil, you can try a solvent. Make a poultice dampened with acetone or amyl acetate (available at drug stores), or with home dry cleaning fluid. Use good ventilation with windows open to remove fumes, do not use near spark or flame, and do not leave on too long.
Rust Stains: Usually the result of metal items such as a lamp, metal container in which plant is placed etc. Use a commercial rust stain remover. Follow directions exactly and do not leave on surface very long as acid in many rust removers can etch the surface.
Acids Fruit juice, carbonated beverages or other acids will etch (remove shiny surface) if allowed to remain on marble. Wipe up acid spill immediately, and wipe surface with wet cloth. If surfaced is etched, polishing may be required.
If you need to polish it, use Putty powder, (tin oxide) can be used to polish dulled or etched surfaces, rubbing on with a damp cloth, folding and refolding to clean damp areas, and preferably using an electric polisher for buffing. (11/21/2004)
Add your voice to the conversation. Click here to answer this question.