I have a Memory Craft 8000 that worked great until yesterday when it completely lost power while I was sewing. It will not power back on at all. Can this be fixed?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
I don't do computerised sewing machines (I repair and refurbish vintage machines for my sewing students) but it sounds as though your motherboard is gone, and you need the services of a qualified repair tech.
Try this first before giving up completely - there MAY be a 'reset' switch on the back or side of the machine - unplug your machine from the wall, wait five to ten minutes, then plug it back into the electricity source and depress/toggle/slide the reset switch - your machine should power back on but you likely will have lost some or all of any stored stitches.
Hi, for your memorycraft 8000 the problem for sur is the fuse maybe you sew a hard or thick fabric
I had this pb many times and its the fuse (most cases) because when we sew a thick fabric the machine stack and the motor ask for more current and the fuse burn out, so just open your machine it's little hard to open it you need an alen key 2mm and philips screw driver.
Perhaps there is a fuse somewhere that can be replaced?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!