I have a Singer Golden Touch and Sew 758. My fabric will not feed. There are no jam ups, it just sews in place.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
are you sure you have the correct stitch length? Having it set to 0 means it won't feed. Also make sure the feed dogs are not down, and your presser foot is not up. Too tight tension will also cause this, or trying to sew too many layers together. Also check to see if there's a knot in your thread.
I have the same problem, did you figure out what is was?
Hey,
Did you ever figure out what the problem was? I have a Singer sewing machine and it's having the same problem you mentioned!
Are feed dogs suppose to be smooth
You may have to take out the bobbin assembly. You may also have a jam under the machine, and you will have to turn the machine over and remove the bottom cover to get a better look.
My neighbor believes it is the common lint build-up problem but I am not familiar with this machine so here are a couple of sites that may help you correct the problem:
the first is the manual (just in case you do not have yours):
www.manualslib.com/
This is a site for troubleshooting your machine:
I do not want to receive anything. I just want to see the answer to this problem.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
