social

Attaching Mirror Pieces To Bowling Ball?

Mosaic covered bowling ball outside.
A mirrored bowling ball makes a beautiful garden decoration. This page contains techniques for breaking or cutting your mirror pieces and suggestions for the best glues or adhesives. There are also tips for grouting and final finishing before placing it in your garden.
Advertisement

Questions

Ask a QuestionHere are the questions asked by community members. Read on to see the answers provided by the ThriftyFun community or ask a new question.

I'm decorating old bowling balls with old mirror parts. What is the best way to break an old thick mirror and the best way to attach it to the bowling ball? Thanks.



Hardiness Zone: 7b

Bonnie from Lascassas

Answers


Bronze Post Medal for All Time! 213 Posts
May 7, 20080 found this helpful
Best Answer

You'll need to wrap the mirror in a towel, blanket or paper bag then hit it with a hammer. Even though you have your mirror wrapped up, be sure to still wear safety glasses! (you can get a pair at the $1 store). Most people use a product from the hardware store called "mastic" to attach glass or tile to mosaic work (you'd need to sand your bowling ball to give it "tooth" before you start). But because it's a bowling ball, instead of mastic, I'd recommend a glue called E-6000 or GOOP to attach the mirror pieces. You might even be able to use a calking gun with construction glue. Also, to get the best looking results, you should grout your project after waiting several days for the glue to set up. If you decide not to grout, I'd recommend a coat of silver or gray paint after you sand the ball & before gluing the mirror pieces down. This way in between the mirror pieces, you'll see a color that more closely matches the tiny mirrors.

Advertisement

* If you're making this as a "garden ball" be sure to seal the grout & make sure your glue, etc is acceptable for outdoor use, so it will hold up to the elements. If you don't grout your ball, you could have a safety hazard because of the sharp pieces, so keep children & those on blood thinners from handeling the mirrored-ball! ... Also, when you work with mirror pieces, be sure to wear 2 pairs of latex gloves, especially when you grout! (so you don't cut yourself)

---> If you live in a dry area & you set your mirror-ball in the garden, remember that the sun will hit the mirrors & could bounce off of them on to dry grass or leaves, which could start a fire. I once road in a truck over loging roads with a Washington State Forest worker, & she told me that a significant amount of forest fires are cause by the sun hitting pieces of glass (from old bottles) which can then magnify it, causing grass fires in dry areas, which can turn into forest fires... Anyway, not to scare you, because the chances are remote, but just use care where you placing your ball, if you live in a drought prone area.

Reply Was this helpful? Yes
May 9, 20080 found this helpful
Best Answer

Hi,
I made a gazing ball out of a bowling ball and mirror. First I filled the holes with expando foam. I had experience working with stained glass so I just cut my mirror into small 1" square pieces. You can do this with a glass cutter. It takes a bit of practice scoring and cutting the glass. I'm sure you can find instructions on the internet. I also added some colored stones to my ball.

Advertisement

I attached the pieces with Liquid Nails (you can buy that stuff at Lowes or Home Depot). I have also used the tile mastic that is used to attach ceramic tiles in bathrooms. When you are finished covering the ball with mirror you need to grout it. It really turns out beautiful if you take your time. Good Luck
Rose

Reply Was this helpful? Yes
By Gilda (Guest Post)
May 7, 20080 found this helpful

Either use tape - tape the ENTIRE mirror - or contact paper and cover the back side. Lay mirror side flat on a sheet, place 2 to 3 layers of old towels on back, taped side and gently hit with a large pan or hammer, preferably a rubber or wooden mallet. Handle carefully.

Reply Was this helpful? Yes
By londa (Guest Post)
May 7, 20080 found this helpful

I'm really curious what you are going to use a mirrored bowling ball for.

Reply Was this helpful? Yes
By Amy (Guest Post)
May 7, 20080 found this helpful

Another alternative-My neighbor did that project using pieces of broken cds.

Reply Was this helpful? Yes
May 9, 20080 found this helpful

If you are wanting same-size pieces, you might take the mirror to a hardware store and have them "score" it for you so that it can be broken at the score marks.

Reply Was this helpful? Yes
By Debbie (Guest Post)
May 15, 20080 found this helpful

Enclose the mirror in brown paper and hit it with a hammer. This gives you uneven pieces. For glue, I would try silicone, you can buy it at any hardware store.

Reply Was this helpful? Yes
By mj rayhart. (Guest Post)
May 15, 20080 found this helpful

I've used a simple glass cutter (one used to cut window panes or mirror tiles) as well as a glass breaker (a pliers shaped tool used by stain glass workers). To affix glass I've found super glue and/or epoxy to work best.

Reply Was this helpful? Yes
Answer this Question
In These Pages
Categories
Crafts Recycled Crafts DecorOctober 7, 2018
Pages
More
🍂
Thanksgiving Ideas!
🎃
Halloween Ideas!
Facebook
Pinterest
YouTube
Instagram
Contests!
Newsletters
Ask a Question
Share a Post
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2022-10-24 20:03:28 in 1 secs. ⛅️️
© 1997-2022 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Attaching-Mirror-Pieces-To-Bowling-Ball-1.html