I have a Singer Esteem sewing machine that recently froze up. The hand wheel does not turn. I have checked for errant threads in the bobbin case as well as the spool threading areas. Any ideas what could be wrong?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
If you have removed the threads than a gear or lever might have broken. You need a repairperson to do this.
Here are some ideas:
The thread is not in the uptake lever. Check to be sure.
Your bobbin winder is stuck in the "locked" position.
Your machine has a clutch. Some older machines have a clutch that must be released.
Your machine just needs to be oiled.
This is happened to ours have you found out what was wrong with years
This is happened to ours have you found out what was wrong with yours . it would be helpful to me to know thank you
i am not familiar with this particular machine but I have some sites that offer suggestions. Maybe you will find some help at one of these links:
www.fixsewingmachines.com/
Here is a link to a manual in case you do not have yours:
Also, Singer company is very good with support of their machines. You can call them or send and email with your question/problems and maybe find the help you need.
I hope this will help provide answers to all of the questions being asked that are connected to this problem.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
