social

Kenmore Elite Icemaker Not Dumping Ice?

May 28, 2012

icemakerI have a Kenmore model 596.58642891. The ice maker is full and will not dump the ice into the bin and makes a clicking sound. What could be the problem?

Advertisement

By Robert

Answers

April 7, 20140 found this helpful
Best Answer

Sometimes our ice maker will quit making ice. This tip works every time. The cause has been (apparently) a cube has become lodged where it should not be. We unload the freezer(pain) and use a hair dryer directly pointed at the ice maker, on high heat, for about 20 minutes. This melts the lodged cube and the ice maker works again.

 
March 5, 20170 found this helpful
Best Answer

Yes, I also find using the hair dryer to melt all the ice or thaw the ice maker, after ward it starts to work better

 
Answer this Question

4 More Questions

Here are the questions asked by community members. Read on to see the answers provided by the ThriftyFun community.

May 3, 2017

My Kenmore slim icemaker makes ice, but will not dump it into the bin. The little button inside does not make it go into motion to dump. I am wondering if anybody knows what's the problem?

I have only had the fridge for four months. I tried to call Kenmore or Sears; what a joke no wonder they are closing their stores.

Answers


Gold Post Medal for All Time! 677 Posts
May 3, 20170 found this helpful
Best Answer

You can void the warranty if you start trying to fix it yourself. I would write them a registered letter saying that I am going to contact the Better Business Bureau if you don't hear from them within 3 days of receiving the letter.

Advertisement

This usually works very well.

 

Diamond Post Medal for All Time! 1,298 Posts
May 7, 20170 found this helpful
Best Answer

Kenmore and Sears should help.

I bought a Kenmore Waffle Maker and had problems, they gave me a new one. They said Kenmore has 2 year warranty for all their products.

 
Answer this Question

August 5, 2011

How do I remove the ice tray in my Kenmore freezer? It has ice in it, but it won't come out.

By Jacvk H.


Answers


Gold Post Medal for All Time! 846 Posts
August 8, 20110 found this helpful
Best Answer

Is the ice release lever in the on or off position? I once was having the same problem and it was simply because the lever wasn't in the release on mode.

 
Answer this Question

October 6, 2015

The icemaker will not rotate fully to dump ice into the bin. Please help.

icemaker
 

Answers


Bronze Answer Medal for All Time! 220 Answers
October 11, 20150 found this helpful

You can check Kenmore's site (frequently asked questions) or contact by phone for help:

www.searshomeservices.com/refrigerator-troubleshooting

 
Anonymous
May 12, 20160 found this helpful

The site just gives you the option to schedule a repair, sic.

 
July 15, 20161 found this helpful

The ice maker will not rotate fully to dump ice into bin

 
July 15, 20160 found this helpful

The ice maker will not rotate fully to dump ice into bin

 
September 13, 20160 found this helpful

Ice tray is stuck in the bump position. Position Ice going in the Ice storage.
LG

 
November 7, 20160 found this helpful

I have a 2015 LG refrigerator and the ice maker will not cycle. I have reset it several times and the only way I get it to dump the ice is reset again. How can I fix it?

 
Anonymous
July 27, 20170 found this helpful

try heating it with a hair dryer.... bottom of the cube trays and some on top... maybe 10 minutes... keep it moving so no plastic melts.....
Now try the reset button again, it it cycles it will dump remaining ice and melted water and make a mess ..

Advertisement

.but it will refill and hopefully you'll be good!

 
September 5, 20190 found this helpful

Where is the reset button?

 
July 4, 20210 found this helpful

How do you reset it. I'm having the same issue

 
Answer this Question

November 1, 2015

My ice maker makes ice, but frequently one or more cubes will stay on top of the assembly and not drop into the collecting bin. If I don't catch them, they freeze to the assembly and stop the ice-making process which means I have to take the entire assembly out of the freezer, let it defrost and reinstall it to start the process again.

Sometimes all the cubes do drop into the collecting bin. What's the hang-up?

Answers


Gold Post Medal for All Time! 677 Posts
November 30, 20170 found this helpful

Here are the most common causes

  • Frozen ice maker fill tube
  • Faulty water inlet valve
  • Too low freezer temperature setting
  • A water filter that needs replacing.
Advertisement

Here is a tutorial that tells you how to fix these problems: pcappliancerepair.wordpress.com/.../

 
Answer this Question
In These Pages
Categories
Home and Garden Repair Appliances Ice MachinesJune 29, 2017
Pages
More
👔
Father's Day Ideas!
👒
Mother's Day Ideas!
🌻
Gardening
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-05-03 09:51:54 in 5 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Kenmore-Elite-Icemaker-Not-Dumping-Ice-1.html