social

Directions for Painting Countertops

I just finished creating faux granite countertops and I'm so thrilled! It was easy and the total cost for each countertop was about $70. Here's what I did:

  1. Using an orbit sander I lightly sanded the laminate countertop.
  2. I then wiped it dry and applied a coat of primer.
  3. Once dry I applied a water based base coat. In my case I used Behr Adobe Straw which is what my walls are painted.
    Advertisement

  4. When they were dry I sprayed Krylon "Make it Stone" in the 2nd to last dark grey. The color wasn't named.
  5. Let it dry for 5 - 7 hours then spray it again and let it dry 5 - 7 hours. It will now look and feel a bit like concrete.
  6. Lastly I mixed and applied Rustoleum Stone Effects Step 3 clear coat for kitchen countertops. It goes on like warm honey and is goopy and gooey but read the instructions and follow them and it will work out great.
  7. Make sure you have previously totally encased your cabinets below and floor in plastic. You don't want this stuff dripping on them. I didn't do this the first time and ended up having to sand and repaint the cabinets.
  8. Use a 4 inch foam brush to push and move around the clear coat just as if you were icing a cake. Slide it over the edge and use another one to catch the drips and push them up on the side.
    Advertisement

  9. Smooth the clear coat well then leave it alone. Don't touch or do anything to it for 24 hours. Then do a 2nd coat. Any mistakes or bubbles will just be covered over. I messed up on my second coat so ended up doing a 3rd. It looks beautiful and is super thick and durable.

Rustoleum says the clear coat is heat resistant but I wouldn't put a hot pot on it. I don't think it would hurt it but it might go cloudy. Just use a hot pad. If you're in a situation like me where my countertops were shot it's worth a try. Even if it only lasts a couple years. It's worth it.

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

March 21, 20120 found this helpful
Top Comment

I started to do this project, after sanding (with a sander) I gave up. The dust and mess is unbelievable. Covering the formica with luan is much cleaner and easier, and then go from there with numerous options!

Reply Was this helpful? Yes
January 27, 20150 found this helpful

I am wondering if I want a concrete look and feel, could I stop at that point and not put the Rustoleum finish on it. Any thoughts?

Reply Was this helpful? Yes
Advertisement

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

Advertisement

In This Page
Categories
Home and Garden Home Improvement KitchenMay 8, 2009
Pages
More
🍀
St. Patrick's Ideas!
💘
Valentine's Ideas!
Facebook
Pinterest
YouTube
Instagram
Contests!
Newsletters
Ask a Question
Share a Post
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2021-02-14 14:16:26 in 1 secs. ⛅️️
© 1997-2021 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/RE-Painting-Laminate-Countertops-1.html