Why won't my inflater turn on. Everything is plugged in correctly
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Some makes/models have an automatic mechanism that won't allow more than 1 attempt at turning it on. Try waiting 20-30 minutes between attempts. Also I suggest contacting the manufacturer for advice or to demand a replacement bed.
You did not write what brand you have and what the remote shows.
Usually when your bed won't inflate, there is a kink in one of the air hoses. Removing the kink should fix the problem.
Stand on the side of the mattress and lift.
Check to see if there is a hose connection on the underside.
Check meaning of error codes.
You can try inflating it with a blow dryer or vacuum. There are other suggestions here www.google.com/
You may need to rebot/restart, also check your switch in case it is not in a on position. If the piece has fault, it will not work as it should, leading to having a short.
Do you have a remote? What make, model or you could call and contact the manufacture. They will help assist you.
The inflater could be faulty.
Check the power cord. Maybe it is not being plugged in properly, the wall socket not being switched on, power issues, electrical wiring in bad condition, loose connections, and an unstable electricity supply.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
