Here are the questions asked by community members. Read on to see the answers provided by the ThriftyFun community.
I removed the ice bin assembly from my Kenmore Elite 106 side by side to clean out the ice dispenser and cannot reinsert the assembly into the door. It will not go down far enough to lock into place. I have tried wiggling shaking, hitting gently - no luck.
By Ron K.
On mine the socket on the door side has a built in key. Look at the position of the key and rotate the stir shaft to match the position of the socket.
Same thing happen to me...we are tired of buying ice at the corner store......what is the answer to this puzzle? Kenmore model 106 517 82 412.
I have a through the door ice maker with a switch for crushed ice or whole cubes. No matter which setting is selected the ice comes out crushed. What do I need to look for or do to fix?
By John
I have a Kenmore Elite Model 795.7107 refrigerator. My one month old ice maker will not dispense the ice into the ice container. We can tell the ice is frozen. The tray starts to turn, but will not empty. It returns to the position it was in. What could be stopping it from emptying?
By Jane from WI
Try taking the tray out, they do come out and soak it in vinegar for a bit. Usually hard water causes the ice to stick.
How can I get the ice tray out of my Kenmore Elite 106.5770? I removed the door in front of the maker. The left side has a locking pin that I can press to release the left side but the right side seems to have a lock of its own, that I cannot find. Any hints?
I have a side by side ice and water dispenser on the outside of my freezer door. The water dispenser works, but there is no water going to my ice maker.
By Delois
Need to take out the ice bucket and check out the water connections. Also, pull out the appliance and check the water hose going to the fridge, it could be caught or crimped. Good Luck.
Mine has done this too. I turned temp gauges to both fridge and freezer to off or zero. I then removed everything from the freezer and defrosted it completely .Something is frozen and blocking your water flow. You can leave the stuff in the fridge just keep it closed. Hopefully this will work for you too.
diane1591
I have a 1997 Kenmore side by side refrigerator. I have water, but the ice maker is not working. I can hear it trying to work, but there is no ice.
By Gerri E
I'm not sure if you mean there is no ice in the bin or no ice drops down into your cup.
If there is no ice in the bin, look for the metal "L" shaped wire sticking out of the icemaker. Make sure it is pushed down. That tells the icemaker the bin is not full. When it is full the wire gets pushed up a little by the pile of ice and tells the maker to stop making ice. Also, if you want to make sure it won't make any ice, you can push it up all the way to tell the machine to stop. It's probable yours accidentally got pushed up, telling the machine not to make ice.
If there is ice in the bin but it won't drop down, check the chute to make sure it is clear. Also make sure the lever in the front on the door is exactly in the "ice" position, not on "water" or "crushed ice." If it's even a little off, you won't get ice (or water for that matter, if it's off the water one even a little).
I hope one of these ideas solves your problem.
We have this problem sometimes, too. We unplug the refrigerator for awhile, as something in the ice maker seems to get frozen. Hope this works for you!
My Kenmore refrigerator icemaker will not make ice. Water will not dispense to the ice maker. All other water supplies are functional.
By D.R.Pearson from NC
I have same problem. If you find out the reason let me know please!
My ice maker is making ice fine. The shut off arm also seems to be doing it's job. However, it will not dispense.
I can hear the motor running, but I believe the spiral coil that moves the cubes is not rotating. Ideas?The ice maker in in my Kenmore refrigerator did work. I put it back together. It goes though its cycles, but the feeler arm does not drop back down.
Mine had similar issues, but my book said to reset the water filter. I reset it 3 times before it started working again.
My ice maker tray is never in correct position to receive the input of water. How do I reset the ice maker timer so that it will be in correct position to receive the water for ice making?
As it is, the water empties into the storage tray under the ice maker. My fridge is an older Kenmore, model 1067689313 (2 door, freezer on top).My ice maker just stopped doing anything. I pulled it out and opened it up. There is no damage or burnt/broken components. Nothing appears damaged at all. The water tube seems clear. I filled the little bowl with water and it froze, but did not dispense.
The light on the inside wall of the freezer gives no error messages. It is as if a fuse is blown, but I did not think these things had fuses. Is there a circuit board that might need to be replaced?Our Kenmore side by side with factory installed ice maker is not making ice at all. Prior to this for some reason every once in a while we would have water spilled forming icicles, otherwise we would have ice. Now nothing happens, no ice or spilled water to form the icicles. Suggestions?
By J. Peterson
You can contact the manufacturer for possible help or request a service company recommendation.
Where you push against the bar to activate the ice maker, it started being hard to push and almost clicks when I push against it. It's a Kenmore Elite side by side. The happens whether you get ice or water.
By Tina A
Likely the switch mount is broken. Watch this video to fix it. youtu.be/
Ice freezes in the bin of my Kenmore two door refrigerator and when I push the dispenser it turns round and round, but because ice freezes in bottom of bin, no ice comes out.
I take it out and clean the frozen ice out, and it works for a few times, but it soon refreezes again.
By Carol S. from Aurora, CO
Sounds like the dispenser door flap is not closing all the way and the airflow that goes up into your bin changes the ice to a block.
Ice bin was full so I emptied it and now the ice maker isn't making any ice. Suggestions?
By Chris
When you put it back in, did you lower the wire bar that lets ice maker know bin is full?
Also, did you check to make sure the bin clicked into the correct position?
I have a 2008 Kenmore Coldspot refrigerator, model #106.58912801. The ice bin freezes up about every two days. The door chute assembly was replaced by a Sears tech approx. 2years ago. I have cleaned it out numerous times and inspected flapper assembly with a flashlight. (no light shows through) Also I have noticed that the middle pillar section between where the doors close around ice bin area appears very warm to the touch to me all the time. Any ideas? Thanks.
By Bob
The middle pillar is where the auto-defrost wires are located inside.
I installed a new ice maker and a new water valve and either one will work.
By Lavonne
My whirlpool fridge will not eject the ice from the tray. I have replaced with a new board, and it freezes ice but will not cut and eject.
The ice maker in a Kitchenaid refrigerator is not calling for water to the ice maker.
By Dave
Can only say that I had the same problem and the diagnosis was the very small spigot connecting to supply was at fault. It is under the sink.
I have a Kenmore Coldspot refrigerator that will not make ice or will not fill up. I tried the hairdryer, but didn't work.
By Keith
Is the release lever in the 'on' position? I ask only because I had the same problem once and it turned out I hadn't realized it was accidently pushed to the off position when cleaning - LOL.
My Kenmore Elite side by side ice bin is stuck. Not only that, it will not dispense ice anymore. It makes a grinding sound on the cube or crush setting. However, what I want to do is remove the bin entirely from the door and it is stuck. I have removed the ice, used the blow dryer, etc. and it is stuck even when pressing the side release. How do I get it out without breaking it?
By Tracy E
We have a side by side and the ice bin gets stuck due to ice melting and then freezing on the underside of the bin. Don't know why it happens, but we first empty the bin of all ice from the top of the bin. Then we place large beach towels around the floor under the freezer door and pour water through the top of the ice bin(you can try to catch the water through the dispenser on the outside of the door or at the base of the freezer door with a bowl or cups).
It takes a while of doing this to melt the ice that's blocking the ice dispenser. We can usually see big chunks of ice blocking the dispenser by taking a flashlight and looking up into the dispenser from the outside of the freezer door. Then after pouring the water through a couple times, we take a long sturdy plastic handle and try to break up the ice stuck in the dispenser(either through the ice bin downward or on the outside upwards through the dispenser while holding the flap back).
It's a real pain!
The icemaker and water dispenser on my Kenmore side by side refrigerator does not work with the new filter in place. They work fine when the filter is out.
By David B