Huskee Supreme Won't Start?I have a 26hp Briggs in my Huskee. It turns over, but won't start. I put new plugs in and a new safety relay switch, but there is still no spark. I have had the seat safety switch unhooked from years ago. I pulled it into garage running to fix the steering and I went to start it and it just turns over. I'm at a loss, any ideas?
My Husqvarna DiedMy Husqvarna was running and cutting grass then it started running rough. I shut off the clutch to the blades and tried to reengage the clutch, nothing. I then shut off the engine, and now there is nothing, nNo click, no pop, nothing! What the hell happened?
Power Board for a Butterick EB6100?Does anyone know where I can get a power board for this machine. It is not 2 years old and it's failed C&C no help. I returned the first machine after 8 months because the display failed, they eventually replaced it. When it works I love it, but I wouldn't buy again or recommendation sorry to say.
Repairing a New Home Memory Craft 7500?Is a New Home Memory Craft 7500 worth getting repaired if it says communication error?
Repairing the Presser Foot on a Kenmore Machine?My presser foot fell off when I touched it and the metal piece fell on top of it with the screw to the side. I don't know what it is or how to fix it. Suggestions?
Pfaff Creative 2140 Screen Issues?I have a Pfaff 2140 that has screen issues. When I plug the machine in and power it on the screen will not display anything and will have a rhythmic ticking noise along with a slight flash from screen. I had done some online searching and found that it could be a capacitor issue, upon finding and replacing what I believed to be the bad capacitor I am still having this issue.
Handheld Sewing Machine Keeps Unthreading?I am having trouble with my handheld sewing machine. I thread it as shown in the instructions, but it creates stitches from the thread already pulled through the needle rather than taking it from the bobbin. Originally it was dropping stitches so I lowered the needle, as suggested in other posts. After that it was sewing perfect stitches, but from the wrong end of the thread.
Vintage Kenmore 158.1040 Wheel Slipping After Oiling?I have been cleaning up and oiling this vintage machine, and it was sewing pretty decently. There was still a catch somewhere, so I was pretty liberal with the oil, trying to locate where it was sticking. But after loosening off the clutch now the wheel is slipping and not turning consistently. It stops, I turn the wheel by hand to get it going, and then it stops again.
Craftsman LT2000 Shooting Oil into the Carburetor?I have a Craftsman LT2000 mower. Why is oil shooting into my carburetor?
Repairing a Troy-Bilt Riding Mower?How do I find someone who can fix a Troy-Bilt riding lawn mower? I need new blades, belts, and a tire replaced. That's all. I need someone who is honest and that I can trust.
Signer 6268 Foot Pedal Not Working?The foot pedal does not run the machine. There does seem to be electrical connection between the foot pedal and the machine, because when the pedal is pressed, there is a click inside the machine, but no other response, however.
Adjusting the Needle Position on a Kenmore Sewing Machine?Can you adjust the position of the needle on a Kenmore 385 17627 sewing machine? It is currently in the center position and I would like to know if I can move it to the right or left to do some topstitching.
Repairing a Broken Backstitch Lever?Has anyone broken this lever before and managed to get it repaired? I've spoken to a few people who have said they can't get the part and also checked for the part myself and can't find it anywhere.
Tension Dial Not Working on Brother Sewing Machine?The tension dial on my Brother sewing machine doesn't seem to make a difference with the tension when I turn the dial. Any ideals of what the problem could be?
My Empisal 760c Overlocker Not Sewing?I bought an Empisal 760c overlocker 3 days ago. As I was busy sewing it jammed and wouldn't sew again, please see attached images. I was sewing 2 layers of faux fur, when it jammed.
2003 Yardman Riding Mower Won't StartMy 2003 Yardman Mtd. riding mower has been sitting for a year. It will turn over but won't start. Any ideas? I've got a fresh battery on and the air filter is clean.
Yard Machine Mower Won't Start?I have a Yard Machine, original year of sale, 2004. It has a 14.5 hp Briggs and Stratton engine and a 38" cut. Yesterday when I tried to start it so I could move it, the engine turned slowly and the starter began smoking. I immediately turned the key to off and removed the starter.
Butterick EB6100 Sewing Machine Stuck in ReverseMy machine is stuck in reverse and I've been advised to 'reboot' it. However I don't know how to do this. Can anyone help please?
New Home Sewing Machine Stuck in Reverse?My New Home 6000 sewing machine only sews in reverse. How do I fix this?
Singer Sewing Machine Hand Wheel Sticks?I own an old Kenmore model 33 sewing machine that I have used for many years. When stitching, the hand wheel will rotate 3 or 4 times when pressing on the foot pedal and then it gets stuck. I can forcefully rotate the hand wheel and get it to sew again, but must repeat the forceful turning of the hand wheel after a few rotations. Can anyone suggest repairs or recommend a repair service in Maine?
Riding Mower Won't Start?Why won't my riding mower turn over or start?
Bypassing the Clutch Switch on a Yardworks Mower?I have removed the 5 wires from the clutch bypass of my 2007 Yardworks 42 inch lawnmower. Which wires do I join together now to bypass the switch?
Presser Foot on Singer Won't Move?How do I repair the presser foot on my Singer 360? It does not move when I flip the lever down.
Craftsman LTD 1500 Keeps Dying?I have a Craftsman LTD 1500 riding mower that dies while cutting as if you shut it off, but will crank right back up to repeat itself. What can I do to fix it? It is getting fuel; I checked.
John Deere Riding Mower Won't Start?I have a John Deere F 910 front mower that I am trying to get running after it has been sitting for some time. The current problem is that the battery will crank one time with no sluggishness, the engine turns over, but doesn't start (carb is most likely clogged but that's another issue) and then the battery is completely dead. I can recharge it fully, but then will have the same result.
Manual for a Nelco Sewing Machine?I am looking for a Nelco sza-820 sewing machine manual. Can anyone help me?
Craftsman 42 Inch Riding Mower Keeps Hitting Starter?I can turn it over and it starts, but it continues to hit the starter.
Toyota Sewing Machine Spool Pin Not Spinning?My wife's Toyota 2260 2640 sewing machine's spool pin won't spin when she uses the foot pedal. Is this an easy fix or should we get it repaired? I know nothing about these machines so don't feel I'm much help.
Finding Service Manuals for Vintage Singer Sewing Machines?Where can get or download service manuals for vintage Singer sewing machines?
Foot Pedal Not Working on My Singer Sewing Machine?My foot pedal isn't working on my sewing machine. It's a Singer Stylist 7258. I looked at the wire and inside the foot pedal and everything looks good. The start/stop function is now the only way my machine sews. Otherwise my sewing machine functions normally. It doesn't show any error code.
Brand New Singer 3232 Won't Sew or Wind Bobbin?I just bought a Singer 3232, from Amazon. I plugged everything in and have power, but when I tried to load thread onto the bobbin spindle, nothing happened when I pressed the pedal. The motor just revved. The spindle is in the correct position. When I put the bobbin spindle in the sewing position and threaded the needle. I tried to stitch, but again the motor just revved.
How Do I Thread a Singer Handheld Sewing Machine?I just received a Singer handheld sewing machine and the arm won't rise high enough to thread the needle. How can I adjust the arm? The rotary knob won't rise any higher than it was in the package.
Craftsman Riding Lawn Mower Won't Start?I accidentally ran over a hose. Now it won't start. I removed the hose by cutting it away and pulling the rest of it out. Now if I try to start it, it clicked a couple of times and then nothing.
Battery Hooked Up Wrong on Cub Cadet?I recently was given a 2012 Cub Cadet Ltx 1040 for free. I was looking to figure out what's wrong with it when I came across the fact that the battery was hooked up wrong. I can only assume they tried starting it like that. What parts do I need to replace as I believe something must be fried.
Repairing a Pfaff 360 Sewing Machine?I have a Pfaff 360. When cleaning it the position finger spring fell out. I have the instruction manual, I have the repair manual, and I have the supplemental repair manual, but I cannot find this part listed anywhere (it fell out when I was using the brush to clean out under the needle plate. Does anyone know where this goes?
Husqvarna Rider Won't Start?YTH20V46 Husqvarna lawn tractor that won't start. I've checked the fuel, the battery, fuse, and replaced the solenoid. When I turn the key nothing, but the hour display comes on.
John Deere Riding Mower Won't Start?I have a JD L130. I have a new battery, that I bought last month. There is also a new fuse, new safety switch on the brake, and had my starter tested (it's good). However my engine won't start or click. Sometimes I get the display to light up. Any ideas?
Manual and Parts for a Modern Home De Luxe Sewing Machine?Searching for parts and manuals for a restoration project
Janome Only Sews a Straight Stitch?I have a Janome My Excel 4023. The stitch select dial turns along with the stitch display, but machine will only sew a straight stitch.
Janome Mb4 Needle #4 Jammed?I have a newer Janome MB4 S machine and needle 4 got jammed during embroidery. Thread piled up in the bobbin and house. I got most of it out, but it's now not working. It is like there is still thread somewhere binding. I can't turn the wheel and the thread lever on that needle is still down. What happened and how do I fix?
Sears Riding Mower Won't Start?My rider won't start. I replaced the filter, plugs, and fuel pump. It's not getting gas. Any ideas? If I put gas directly into the carb it starts for a few seconds. The gas lines are clear.
Cub Cadet Mower Won't Start?I changed my PTO belt on my 2009 ltx1042 Cub Cadet mower and now it will not start and I do not no why.
John Deere Riding Mower Won't Start?I'm new to mowing lawns. My John Deere started up fine this morning, but after engaging the blades it shut off. The mower deck is lowered, but the blades are off. Now it won't turn over to start up again.
Manual for a Nelco Sewing Machine?My mom has an old Nelco sewing machine, model 1260C and is having trouble with adjusting the tension on it. She doesn't have a manual so I am looking for a manual for this model. Is there anyone who can help me find a manual?
Adjusting the Needle Alignment on a Singer Sewing Machine?I have a Singer 8019 model sewing machine. I need to fix the needle alinement to the center. How can I do that?
Kenmore Light Out and Machine Won't Start?My Kenmore model 1345 was working great. I unplugged it to start again the next day, but when I plugged it in the light would not go on. The machine didn't start when I pushed the pedal. I tried a different outlet, but that did not correct it. Did the light just burn out or what? I am in the middle of a project and need to finish. What could this be besides the light which I have never changed?
Kenmore Bobbin Winder Not Working?My Kenmore sewing machine is about 50 years old. It sews and works fine, however the bobbin winder does not wind. I am able to release the knob so needle does not work, but winder does not wind. Since we are quarantined, I am not able to go to repair shop.
Singer Sewing Machine Not Sewing?I have a Singer Fashion Mate Model 237. The presser foot will raise and lower. It will pick up the bobbin thread and bring it through to the top. It feeds the fabric properly. I have not moved the tension from number five. The problem is that it is not sewing ever since I broke a needle.
Finding a Replacement Handwheel for a Kenmore Machine?I am trying to locate a replacement handwheel for a Kenmore zig zag sewing machine 158.1803 or 158.1703.
John Deere 115 Lawn Tractor Won't Start Without Jumping the Battery?I have a John Deere 115 lawn tractor. I replaced the battery and the solenoid. When I try to start it, I barely get the engine to turn one rotation. It turns and stops and there is a crying/whining sound. The only way to start it is to jump it with my car. Would a new starter fix this problem?
Craftsman Riding Mower Won't Start?My Briggs 19.5v twin turbo cool mower struggles to turn over if at all with the spark plugs removed and the battery fully charged. I was told it needed a starter, but after investigation I found that the flywheel wouldn't move. I removed the plugs and squirted some mystery oil in the cylinders and it broke free right away and spun by hand easily.
Fabric Feeding Diagonally on Singer Machine?The fabric won't feed straight on my Singer 9960. So when I sew, it moves in a diagonal manner. The feed dog is up and there is no dirt found around it. How do I correct this?
Machine Only Sews Forward When Pushing Reverse Button?I bought a vintage Japanese badged Singer zigzag machine. It sewed beautifully, but I couldn't get it in reverse. So I removed the stitch regulator button as this is part of it, to see if the reverse button was frozen. When I put it back together, now it won't sew forward unless I hold the reverse button. The feed dogs don't move unless I hold it in.
Tension Issues with a Kenmore Sewing Machine?Bought a Kenmore 385.16324 sewing machine new 16 yrs ago. It has been a work horse. I use it all the time. The tension is now a problem, see photos: #1 is top and #2 is bottom. I have cleaned the bobbin case, feed dogs, replaced the needle, rethreaded it numerous times, and worked on tension settings after each sample row. I am still getting the weird stitches on the back side.
Finding Parts for a New Home sx2122 Sewing Machine?I have a New Home sx2122 sewing machine. Can anyone help me find out when it was manufactured? I have had it since it was new, but I've had it that long and I can't put a date on it. Also are parts still available for my beloved machine?
Upper Thread on Pfaff Catching On the "Thread Fetcher"?I have a Pfaff Quilt Expression 4.0. Just last night it stopped working - the fabric wouldn't feed through and the bobbin thread wasn't catching. After some investigation it appears that the upper thread is getting caught on this little metal arm that is called an "upper thread fetcher". Anyone know why? Or how I can fix it?
Janome Sewist 780DC Doesn't Pick Up Bobbin Thread?My Janome Sewist 780DC will not pick up the bobbin thread. I have replaced the needle and made sure the reel of thread and the bobbin thread are the same.
Kenmore Zig Zag Stitch Knob Not Working?I was given a Kenmore 158.504 with a cabinet in good condition by a friend. I just fell in love with this one. The zigzag knob in the front does not seem to do anything though. I opened up the top access and see that the knob when turned does not move the needle sideways like it is supposed to. I have a feeling some kind of a cam is missing.
Repairing a Pfaff Creative Sensation Sewing Machine?I have a Pfaff Creative Sensation with ActivStitch technology. When I press the pedal, it sews a few stitches and stops. The front panel turns green. Can anyone explain why this is happening?
Reattaching Thread Tension Knob on a Kenmore Machine?I'm trying to learn how to sew with my mom's Kenmore Ultra-Stitch 8 sewing machine. The first step was to set it up. However, the upper tension thread control knob/device is not attached to the machine and I cannot figure out how to reattach it. I have the manual, but it doesn't provide any info on this. Can' anyone walk me through how to fix this?
John Deere z445 Keeps Stalling?My John Deere z445 will crank on choke, but when taken off choke it dies instantly. Have any suggestions?
Huskee Riding Mower Only Starts When Jumped?We bought a used Huskee riding mower last year. When we went to look at it, it started fine. We turned it off loaded, it on the trailer, and came home. When we went to get it off the trailer it wouldn't start. So since last year we have been jumping it off with the car every time we want to cut grass. When we jump it with the car it starts and runs fine, no problems while cutting the grass.
Janome Needle Arm Bumps into Threader?I have a Janome DC2011 sewing machine. When I zigzag stitch, I found that the needle arm bumps into the needle threader at the highest point in a single stitch. Can I repair this myself?
Bolens Riding Mower Won't Start?I have a 2005 Bolens 15.5 mower. I have replaced the carburetor and the spark plug. I have checked the fuel lines going into the carburetor. It tries to start and kills itself.
Kenmore Sewing Machine Foot Pedal Not Working?I have a Kenmore 10 older model 12511 and it was working good. While I was sewing it stopped working. I stepped on foot pedal and it would no longer go. What could be the problem?
John Deere 345 Won't Start?I have a JD345 that was running and no longer will start. Spark occurs at both plugs and are new. The fuel pump seems to draw in fuel, but nothing. I poured a very small amount of fuel in the carb and the engine did run, but then shut off again. Any thoughts?
Sewing Machine Needle Won't Move Using Pedal?I have a Singer sewing machine. I have not had it a year yet. When I went to use my machine today my needle will move using the handle to move it up and down, but when I press on the pedal it makes the noise, but the needle stays still. The bobbin pin spins like normal when I use pedal still. I have taken the cotton off and reloaded it and there was no change.
John Deere Riding Mower Won't Start?After sitting for the winter, my mower will do nothing! It was stored in the garage. It makes a clicking noise like it wants to start, but nothing. I've charged and jumped it off or tried to, I changed the spark plugs, checked fuses, and some switch I want to say, but am not sure. I'm at a loss!! It's still a really good mower at only going on 3 summers. Any suggestions?
Tension Not Adjusting on Singer Sewing Machine?I'm trying to sew using my Singer machine, but the thread is tangling badly underneath my fabric. The stitching on the top of the fabric looks fine, but underneath its a mess. The bobbin is the right way up, and I'm fairly sure it's threaded properly as I followed the manuals instructions. I suspect the issue is the tension, as it feels the same whether I turn the dial up or down.
Feed Dogs Stuck Down on Janome 415?My Janome 415 jammed and I dropped the feed dog and removed the bobbin and cleared the jam. The feed dog will not go back up. Is this something I can fix?
Zig Zag Lever on New Home 613 Sewing Machine Stuck?I have New Home model 613 sewing machine. It is 42 years old and I cannot get the zig zag lever to move.
John Deere Mower Won't Start?If I can't jump out the solenoid on my John Deere riding mower, does that mean the solenoid is shot and needs replaced?
Replacing the Thread Guide on a Singer 6215C?How do I replace the thread guide on my 6215C? The manual doesn't show me how.
Empisal Machine Pattern Dial Selector Not Working?My Empisal 550 sewing machines pattern dial selector is not working. I can turn it and it will stay on straight stitch, how do I repair this?
Poulan Pro Riding Mower Won't Start?My husband and I purchased a Poulan Pro riding mower, product #960220029, model PP11G30. We used it once to cut the grass and then parked it. When we went a second time to use it it would crank like it wanted to start, but wouldn't. Knowing nothing about lawn mowers we purchased a new battery. Once installed it continues to do the same thing.
John Deere 110 Mower Won't Start?The flywheel turns freely when the spark plug is removed. With the plug installed, the starter cannot turn flywheel.
Kenmore Machine Won't Sew Hand Wheel Locked?I have a Kenmore 385.11 sewing machine. I was filling a bobbin the other day and had the hand wheel turned in that position. Then when I was done I put the hand wheel back into the sewing position, but it locked. The hand wheel will not move and machine will not sew. What do I do now?
Kenmore Keeps Switching from Zig Zag to Straight Stitch?I have a Kenmore sewing machine model 835.16221. The first 12-15 stitches on the zigzag setting are perfect and then it switches to a straight stitch. Any ideas on how to correct this?
Bobbin Won't Wind on a Toyota Sewing Machine?I have a Toyota series SP20 sewing machine. My bobbin is not winding even though I have put a new battery in. The battery seems loose in the holder. Can you suggest how I can fix this problem please?
John Deere Mower Won't Start Normally?John deer series 100 does not have enough power to start unless you jump start or disconnect the deck belt. It also has a brand new battery and I just put a brand new deck belt on.
Buying a Shuttle for a Jones Serpentine Hand Crank Sewing Machine?I have a Jones serpentine hand cranked sewing machine (cat back). Please can someone advise me of the shuttles I need for my sewing machine. It has shuttle reel, but no shuttle. I'm hoping it will then work. It also has 2 needles, but I'm hoping to purchase more.
Foot Pedal Not Working on Empisal Serger?Two months ago I bought a an Empisal serger. I have only used it twice. I was using it today when the foot stopped, the light was still on. I tested the foot on my sewing machine and it was working fine, but when I put it on the serger it was not working. Can anybody help me by letting me know how I can fix it or what might be the problem?
Toro Mower Won't Start?I put a new solenoid, starter switch, and the battery was charged. Why won't my Toro start?
Singer E2 Error Code?I just recently bought my Singer 5200 and have been getting an E2 error on it since I first tried it. I also have the bobbin image showing and have rewound and rethreaded the machine. I still am receiving the error. What can I do to fix it?
Replacement Parts for a Singer Sewing Machine?Where do I buy the inner parts for a Singer E99670 handwheel replacement coil?
Husqvarna YTH24V54 Riding Mower Won't Start?I was mowing and ran over an ant mound and the mower died. I turned everything off, made sure it was set just like it was when I got on that morning. It does nothing, not even a sound. The lights work. When I put the blades in the on position and try to start, it clocks like it is telling me the blades are active. That is the only sound I get from the mower.
Husqvarna Sewing Machine Stitches Without Using Pedal?The pedal of my sewing machine, a Husqvarna 2000, doesn't work any more. When I plug it in, it starts up the sewing machine, but I have no control over it. The needle goes on and on whether I apply or don't apply pressure on it.
Repairing a Kenmore Sewing Machine?I have a Sears Kenmore model 33 sewing machine. The pressure foot knob is stuck in the down position. What can I do? Also at the same time the knob that locks the stitch in for the zigzag stitch is stuck. I cannot turn it at all.
Cub Cadet Mower Won't Start Without Jumping?I have a Cub Cadet mower that will only start when it is jumped. It has a brand new battery, but as soon as you shut it off and try to restart it all it will do is click.
Singer Bobbin Winder Is Not Working?I have a Singer 7470 and the bobbin starts to wind, but then immediately shuts off with a beeping sound. I have to turn the machine off and then on to clear the display. Any thoughts?
Nelco 7400 Manual?I have a Nelco 7400 sewing machine. For some reason the bobbin is not sewing, it threaded thru, but is not sewing at all. And I can't seem to be able to find a manual for my specific machine. If anyone is able to help troubleshoot or if they have a spare manual they are willing to share, it would be greatly appreciated!
Repairing a Kenmore Sewing Machine?I have an old Kenmore sewing machine and it runs smoothly until I put the bobbin cover on it and then it freezes up. It is in a bind when it freezes up. What do I do for it?
Adjusting New Home Needle Position?I have recently acquired a 535 New Home Janome sewing machine. How do I adjust the needle position so that it is in the centre? It is sewing fine, but the needle is to the left as shown in the picture.
Problems with Singer Sewing Machine Auto tension?I am always having problems with my Singer sewing machine's tension. I have checked everything, needles, etc. But even after many services it still drags the the fabric down and makes loose bottom stitches. It's a Singer heavy duty 1980s Pattern 17-24 machine with an auto tension. Does anyone have any ideas before I dump it and buy a new one?''
Craftsman LT2000 Starts But Won't Cut Grass?I have a Craftsman LT2000, model 31C707 riding mower and it cranks and runs, but has but very little power. It will move forward and backward, but does not have power enough to mow the grass. Is this evidence of a burnt valve or what?
Elna Experience 580 Won't Sew in Reverse?My 2yr old Elna Experience 580 has a reverse sewing button. When I use it all that happens is the needle moves extremely slowly. What can I do to solve this!
Singer 9022 Bobbin Winder Not Turning?I purchased my Singer 9022 new and have had this machine for many years. It's been amazing, however, now my bobbin winder won't wind. I can hear it whirling when pressing the floor pedal, but the bobbin will not turn. I was trying to remove the top to take a peek, but can't figure out how. I removed all screws (3) that I saw, but there's something else holding it down.
John Deere L 120 Won't Crank?I have a John Deere L 120 that won't crank. I put a new battery in and can hear it trying to crank, but it doesn't. I removed the started and kept it wired; the starter spins. How do I make sure the engine is not seized and is there another possible cause or a way to manually roll the engine over?
Troy-Bilt Riding Mower Won't Start?My Troy-Bilt riding mower won't start. There is just a clicking noise. So I replaced the starter solenoid and still have the same problem.
John Deere Lawn Tractor Won't Start?My 2 year old E130 John Deere won't start. My wife shut the motor down while the blades were engaged and then it wouldn't restart. It has fresh plugs and oil. The battery reads 12 volts on a meter. I checked the electrical connections. The battery cable is clean and tight. I turned the blades manually and moved the engine shaft. Nothing works. Any ideas?
Singer Machine Won't Pick Up Bobbin Thread?My Singer 7422 Advanced portable machine locked up when I was trying to use the zig-zag stitch for repair on denim fabric shorts. I had to cut the material/thread loose. It sounded like it was hitting something. I re-threaded the machine and it will not pickup the bobbin thread.
Singer Sewing Machine Stuck in Reverse?My model 6235 Singer sewing machine only sews in reverse. I have taken it somewhat apart, but it looks like the reverse button raises the reverse lever, but the lever will not come back down unless I push it down. I have oiled the moving parts but it seems pretty stiff. Any ideas?
